top of page

977 1st Avenue North, Naples · Monday to Friday, 8am to 4:30pm

Trade accounts  ·  (239) 262-4755

Kelly Blueprinters, since 1952

Full size vs half size plan sets and which one you need

2 days ago
2 min read
Full size and half size architectural plan sets side by side with a pencil and scale

The short answer. Full size plans print at the size the architect drew them, usually 24 by 36 inches, so you can measure them with a scale. Half size sets shrink each sheet by 50 percent to 12 by 18 inches. They're cheaper and easier to carry, but you have to double any scaled measurement. Most jobs use a full size set for the permit and field and half size sets for everyone else.


What full size means


Full size is the sheet size on the title block, most often 24 by 36 inches (ARCH D) or 36 by 48 inches (ARCH E) for larger projects. At full size, a quarter inch on paper equals a foot in real life if the sheet says 1/4 inch = 1 foot. That's what inspectors, superintendents and subs rely on.


What half size means


A half size set takes the 24 by 36 sheet and prints it at 12 by 18 inches. Everything shrinks by exactly half, so a 1/4 inch scale drawing becomes 1/8 inch scale. Half size sets fit on a desk, in a truck and in a binder.


Who uses which


  • Permit submittal and inspections: Full size (check your jurisdiction)

  • Superintendent and field crew: Full size, plus a half size for the truck

  • Subcontractors bidding: Half size or PDF

  • Homeowners and designers: Half size

  • Office and meetings: Half size


Can you scale off a half size set?


Yes, if you remember to double the result, or use the next scale down on your architect's scale. Many sheets carry a graphic scale bar too, which shrinks right along with the drawing and stays accurate. Just don't trust a written scale without checking.


What file do we need?


Send a PDF at full sheet size and 100 percent scale, one sheet per page. We'll print full size, half size, or both from the same file.


Order both at once


Plenty of jobs order one or two full sets and a handful of half size sets in one go. Price both in the Plans and copies tab of Get a price and see blueprint printing for everything we do with plans. Most prints are ready the same day.


FAQs


What size is a half size of 36 by 48?

18 by 24 inches.


Are half size sets accepted for permits?

It depends on the jurisdiction and the type of submittal. Many now accept PDFs. Check with the building department first.


Do half size sets cost half as much?

They cost less per sheet. Get a price shows both so you can compare.

Comments


bottom of page